Patrik
pd Patrik Boards qt-wave (Quin Fin Wave)
pd Patrik Boards qt-wave (Quin Fin Wave)
2024 qt-wave

OVERVIEW

Different wave spots, different conditions and different styles of riding make it really difficult to develop a high-level production wave board... but our QT-WAVE is the answer for those who want to travel light and play in any kind of wind and wave conditions.

With the 5 fin boxes (1x US, 4x Slot) you can setup the board as Singlefin, Twinser, Trailer, Tri-Fin, Thruster, Quad and even Trailer Quad (5Fin). With all these options you can perfectly adapt the QT-Wave to your style of riding and the type of waves the spot is offering.

WHAT'S NEW TO THE PREVIOUS MODEL:
- Modified tail rocker for a more agressive feeling on the wave and more control on the turns
- New Vee-shaped tail section for better water release and a more alive rail-to-rail feel
- Optimised strength-to-weight ratio and new graphics by Fabio Canella

SHAPE

Optical aspects & Footpads
With the new graphics influenced by Italian designer Fabio Canella we have created a colourful but still clean board design. The 6mm thick diamond groove grip pad has an extra 6mm soft sponge under-layer which makes it 12mm in total. The special layup uses the hard layer to spread the load onto a wider board surface via the soft bottom layer of the pad. This gives us more impact resistance while keeping a direct feeling under your feet.

Shape & Outline
Balanced and pretty. Shaped by hand. After thousands of boards shaped the experience and precision of our shaper Patrik Diethelm will easily outperform any CNC software. The result is a perfect shape with a beautifully flowing outline. The wider front section gives you enough lift in the nose area to go planing early and to be able to hit the whitewater late. The narrow tail gives you that agressive feeling when moving the board from rail to rail. Enjoy maximum grip in carved top turns. Choose between carving and throwing spray or sliding and new-school tricks on the wave. This board will never hold you back.

Scoop-Rocker and Bottom Contour
New Single into double concave into vee concept that creates more rocker on the rail line while keeping a moderate rocker in the center. This gives you the best of both worlds. Good accelleration and speed on the straight and more response and a playful radical feeling in the turns. A slight tail kick under your backfoot allows you adapt your turns to the wave any time. Progressive bottom shape with deeper concaves on the smaller sizes for more control. Connect fast sections with ease, throw some big spray... The new QT can do it all.

Fins & Fin Boxes
The QT-Wave comes with 4x PATRIK Power wave (PW) fins. Center US 8” box to allow the use of bigger single fins. 4 side slot boxes to save weight.

Inserts
Each insert offers 4-positions and on the front strap has a double plug to be able and change width and angle for different foot size and riding style.

Volume distribution
The balanced thickness under your feet and around the mast track is one of the key points to create a good allround wave board. A light dome deck allows as to keep thinner rails while 'hiding' some volume in the center of the board. This trick also improves the stiffness and break resistance of the construction. The much thinner tail area gives you control, grip and manoeuvrability.

Rails / Tucked
The round rails & tuck starting in the nose area make the board feel smooth troughout the turn. Round rails give you control and also more grip. Under the mast track the tucked show a slightly more visible edge which gets a little sharper between the straps and ends up sharp right behind the back strap for early planning acceleration and top speed.

Deck Shape
The smooth balance ov the whole shape is being carried over into all details. The light domed deck is more round at the front foot for a comfortable stand and good grip in the straps when planing and jumping. More flat under the backfoot for a better connection to the wave.

 

CONSTRUCTION

The topic where opinions split radically. But at the end of day let the advanced riders prove that our construction is built to last. The full carbon/kevlar deck is light and stiff with a good impact resistance. The Biax glass fibres on the bottom give you that controlled extra flex our riders love for the big turns and hard landings. Important fact: The softer biax glass spreads the load much better into the 3d construction than a full carbon bottom would. This results in better flex, better strength and better overall performance, while saving on production costs where it's not needed to offer you a more affordable board. Patrik Diethelms knowlede in composite construction is unmatched in the windsurf industry. This is our way of creating sustainable products that will last you many years when used correctly.
 

SPECS

  Length Width Volume Tail Width
at 300		 Nose Width
at 2000		 Weight
(+/-6%)		 Strap
Options &
Insert Holes		 Strap
Quantity		 Fin Box
qt-wave 76 2260 555 76 336 369 TBC 5×4 3 1xUS 8″
+4xSlot
qt-wave 82 2270 570 82 347 380 TBC 5×4 3 1xUS 8″
+4xSlot
qt-wave 87 2280 585 87 353 397 TBC 5×4 3 1xUS 8″
+4xSlot
qt-wave 94 2290 600 94 360 412 TBC 5×4 3 1xUS 8″
+4xSlot
qt-wave 102 2300 630 102 382 443 TBC 5×4 3 1xUS 8″
+4xSlot

 

 

 

2.799,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik AEON Windsurf Foil System Set
Patrik AEON Windsurf Foil System Set
2024 Patrik AEON Hydrofoil FOIL Windsurf Set
(Verfügbarkeit bitte vor Bestellung anfragen, es sind nicht immer alle Sets verfügbar)

OVERVIEW

Pick your pre-configured AEON sets above if you don't wish to select your single parts individually.

AEON SL750 SET (Free-Race and low-wind Slalom)
95 DIM-M Mast, 750 DNA-M Frontwing, Alu 100 V1 Fuselage, 195 DNA-H Backwing + Accessories

AEON SL900 SET (Free-Race and low-wind Slalom for heavy riders)
95 DIM-M Mast, 900 DNA-M Frontwing, Alu 100 V1 Fuselage, 195 DNA-H Backwing + Accessories

AEON CR900 SET (Free-Race and Course Racing)
100 DIM-XL Mast, 900 DNA-M Frontwing, Alu 110 V1 Fuselage, 195 DNA-H Backwing + Accessories

AEON PWA Alu 375/550 SET (Performance Slalom and Speed)
95 DIM-S Mast, 375,550 DNA-H Frontwings, Alu 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PWA Alu 450/550 SET (Performance Slalom)
95 DIM-S Mast, 450,550 DNA-H Frontwings, Alu 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PWA Alu 450/650 SET (Performance Slalom for heavy riders)
95 DIM-S Mast, 450,650 DNA-H Frontwings, Alu 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PWA Ti 375/550 SET (Worldcup Slalom and Speed)
95 DIM-S Mast, 375,550 DNA-H Frontwings, Titanium 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PWA Ti 450/550 SET (Worldcup Slalom)
95 DIM-S Mast, 450,550 DNA-H Frontwings, Titanium 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PWA Ti 450/650 SET (Worldcup Light Wind Slalom)
95 DIM-S Mast, 450,650 DNA-H Frontwings, Titanium 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PRO Alu SET (Performance Slalom)
95 DIM-S Mast, 375,450,550,650 DNA-H Frontwings, Alu 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

AEON PRO Ti SET (Worldcup Slalom)
95 DIM-S Mast, 375,450,550,650 DNA-H Frontwings, Titanium 100 V1 and V2 Fuselages, 160 and 195 DNA-H Backwings + Accessories

(Each AEON set comes with Shim-Set, TX30 M6/M8 Screw-Set, Foil Bag Pro and TX30 Screwdriver.)

 

DESIGN CONCEPT

AEON – The only multi sport foil system winning international titles in four disciplines of Windsurfing and Winging.

DESIGN GOALS: We wanted this foil system to be commercially available at different price levels from “zero-compromise Worldcup performance” to "high-perfomance and budget-friendly". The AEON has been designed for maximum control – easing the fight of 3-dimensional flight for both the world cup rider fighting in the pack and the intermediate rider. In our unique and precise hybrid design process the human brain (knowledge) and hands (feeling) are leading the computer aided design – not the other way around! We have invented unique foil designs that “A.I.” (artificial intelligence) could never create as we are literally developing and testing gear outside today's software data range.
The AEON system is working as a whole. Mast, fuselage and wing designs interact. The result is unparalleled performance.

AEON foilmasts are superior in terms of flex and twist. They'll give you the most controlled flight you've ever experienced. All dimensions (S,M,L,XL) offer similar stiffness and control but vary in top speed and price. Our "cheap" masts (M,XL) never feel whobbly or soft like other brands' entry level products do and are a stunning alternative to the elite masts (S,L) if you're on a budget.

AEON fuselages are using our self-locking connection for the most direct power transfer possible. Available in aluminium (best cost/performance ratio) and titanium (stiff and ultra thin for best average and top speeds) which both outperform carbon fuselages.

AEON frontwings are more efficient than any other foil wings out there and can be ridden 50-80 cm2 smaller while offering an extended low-end and perfect jibing characterics. The hard version (DNA-H) offers the best high-end control while the medium stiffness (DNA-M) offers a touch more low-end at a more affordable price.

AEON backwings offer amazing control plus unmatched cornering speed and accelleration while beeing ultra thin and ultra stiff in our unmatched DNA-H construction. Special low-mount with down-facing tips for extended flight range.

SETS VS. SINGLE PARTS: Choose from our pre-configured foil sets for the most convenient and easy entry into the world of AEON.
Pick your favourite single parts to create your individual AEON system with multiple combinations to customise your foil perfectly.

ab 3.033,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Verlängerung X-Tension Alu RDM Extension
Patrik pd Verlängerung X-Tension Alu RDM Extension
Patrik RDM Aluminium Verlängerung Alloy Extenison

Durchmesser:
Standard RDM

Material:
Alu

Sizes:
2-32cm Verstellbereich
2-48cm Verstellbereich

Optional:
​Carbon Verlängerung auf Nachfrage
ab 129,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik AEON Foil Masts Mast
Patrik AEON Foil Masts Mast

Patrik AEON Hydrofoil Masten
(Verfügbarkeit bitte vor Bestellung anfragen, es sind nicht immer alle Größen verfügbar)

OVERVIEW

AEON – The only fully compatible multi sport foil system proving world cup podium places and international titles in four disciplines and both sports of Windsurfing and Winging.

  • Formula Windsurfing Foil World Champion 2023 – Elia Colombo

  • IFCA Slalom Foil European Champion 2023 – Michele Becker

  • Wingfoil Racing & Freestyle European Champion 2023 – Bastien Escofet

Our four carbon masts cover all the needs of customers using the deep tuttle box system. These foil masts beat everything currently available on the market in terms of drag, flex stiffness and twist block. The technical advantages result in better control over your foil, a more relaxed ride in choppy conditions, easier jibing, more topspeed and less breakage. Experience a whole new level of control. Get your AEON foil now!

(More mast options and sizes with US-Track system in carbon and aluminium constructions to come in 2024.)

 

SPECS

FOIL MAST  95 DIM-S  95 DIM-M  100 DIM-L  100 DIM-XL
DIMENSION  small  medium  large  extra large
PRICE LEVEL  $ $ $ $ $  $ $  $ $ $ $  $ $ $
LENGTH  950 mm  950 mm  1000 mm  1000 mm
ASPECT RATIO  7.22  6.94  7.41  7.14
SURFACE  1250 cm2  1300 cm2  1350 cm2  1400 cm2
HEAD CHORD  170 mm  170 mm  170 mm  170 mm
FOOT CHORD  103 mm  113 mm  113 mm  113 mm
MIN. THICKNESS  11.3 mm  12.3 mm  12.3 mm  12.3 mm
DESCRIPTION  pro level  high performance  pro level  high performance
FLEX STIFFNESS  08/10  08/10  10/10  08/10
TWIST BLOCK  10/10  08/10  10/10  08/10
CONTROL  08/10  08/10  10/10  08/10
TOPSPEED  10/10  08/10  09/10  08/10
UPWIND ANGLE  09/10  08/10  10/10  09/10
CONNECTION  Flat Head DTB  Flat Head DTB  Flat Head DTB  Flat Head DTB

 

  • 95 DIM-S: This is our no-compromise comp slalom mast and not only the thinnest and narrowest but also the stiffest flex/twist currently used on the worldcup scene.

  • 95 DIM-M: Same outline as DIM-XL. Slightly thicker and wider for a more comfortable ride than the DIM-S. Your budget-friendly alternative to the 95 DIM-S mast.

  • 100 DIM-L: More narrow outline than Dim-M and Dim-XL. Made for the ultimate Course Racing competition performance without compromise. 

  • 100 DIM-XL: Same outline than DIM-M but 50mm longer at the head. Slightly thicker and wider than the DIM-L. Your budget alternative to the DIM-L.
     

MAST OUTLINE 
Wide at the base with an extended front "nose" for added stiffness and less twist. With this design trick we're able to move the leading edge forward (to compensate for extensive mast rake that is actually moving the foil position backwards) which results in a more balanced and more effective fuselage position on the mast.
Narrow chord and thin profile at the fuselage too minimise drag and turbulences. Extra narrow chord for the DIM-S PWA slalom mast.

(Cutline given to adjust the AEON foil head to any boards using the "angled tuttle box system")

 
ab 1.599,00 EUR
inkl. 19% MwSt. zzgl. Versand
pd Patrik Wing Boards A.I.O. ALL IN ONE
pd Patrik Wing Boards A.I.O. ALL IN ONE

A.I.O. = ALL IN ONE (Bitte verfügbare Größen VOR Bestellung anfragen. Wegen der großen Nachfrage sind nicht immer alle Größen sofort verfügbar!)

A.I.O. stands for “All In One” and those shapes look like if they were forged in another time!

Exactly this is what PATRIK stands for and we could not be prouder that in Germany they are praised as the “Tesla of wing boards”!

As a shaper and designer Patrik can leave nothing to chance and to ride everything what he designs and feel what is really needed is his strength.

To be able and understand every shape line even on the smallest board size 4’6” with only 35 litres Patrik also showed his persistence on the water and pushed himself to the limits while drifting shoulder deep in a cold Swiss mountain lake for 1 ½ hour refusing every help from other riders and rescue boats.

Patrik: “It was really the most challenging moment since a very long time! I hated myself to weight 94kg – my shoulder injury from last year was painful and I was mad at mother nature for the fluky wind! I promised myself to at least fly once or come back at dark and looks like mother nature wanted me to stop swearing and I got my run after all “smiley”!”

Those innovative all-in-one boards are built to last!

Those boards can be used for all sorts of foil sports from surfing to tow-in, wake, SUP, Wing and in the two windsurf options also windsurf. An innovative two-step side shape gives the board unique stability and maneuverability.

The full-carbon sandwich PVC construction makes those boards really stiff and consecutively very high performance. On the A.I.O. you feel your foil like you have never felt it before.

We decided to give you really all the options with our A.I.O. range that is why all the boards have both fin box options the Foil deep turtle and also the US plate system.

The A.I.O. is a perfect tool for all dedicated watermen to get the highest performance!

 

CONSTRUCTION

Normally construction comes at last but while shapes can be claimed to be “the best” from everyone the construction is a fact and reflects the price and the brands’ philosophy! To go through quick learning steps, improve skills and to win competitions the stiffer the board and foil the better it is and any other statement is most probably related to marketing. As the only brand worldwide being able to produce “One-Shot-Monocoque” hollow windsurf boards (AIRINSIDE) we implemented our knowledge also to our EPS boards. With a full Deck-Rail-Bottom PVC Sandwich with full Deck-Rail-Bottom Carbon wrap and the exclusive Pre-Preg Carbon/Honeycomb Mast-track & Deep Tuttle Foil Box (depending on the model) and the exclusive Monocoque reinforcements, we are easily leading today’s construction methods for this sport.

We know there is boards being sold for very low prices all around the market, but our concern is how long will they last. After the full wing season in Australia quite much has been learned how softer constructions handle stress of the riders and landings. Whoever has a higher understanding in composite technology and a decent knowledge for foil boarding knows that a board construction without PVC is not suitable for any rider – not even for the beginner.

1)     Stiffness & lightweight are the key words to learn fast and to perform at best in competition.

2)     Static load is the killer of any foil board.

3)     Impact is a standard for any learner and pro who wants to get better.

It is a fact that any construction without a PVC sandwich shell wrapped all around the board is simply to save money. The feedback from repair shops around the world are also straight forward – “Any construction without PVC sandwich will not last more than a few month – no matter if Carbon or not!”

 

SIZES:

  • 4’6” / 5’0” / 5’1”: With the three smaller sizes we are covering Wing-Foil, Surf-Foil, Wake-Foil and Tow-In-Foil.
  • 5’2”: Also covering Wing-Foil, Surf-Foil, Wake-Foil and Tow-In-Foil but additionally also to be used for advanced Foil-SUP.
  • 5’9” / 6’6” and 5’9”-WS / 6’6”-WS: The wider width is eliminating the possibility to Surf-Foil but it opens up the range of use with Foil-SUP and windsurfing for the “WS” models.

SHAPE:

  • Rail: For the 4’6”/5’0”/5’1” we designed a “step rail” for a good grip while duck diving and to reduce the volume to be able and sink the board for more stability when it is rough and windy. It is hard to kneel on a board when it is wavy and the narrow shape also permits low flying tight turns with a shorter mast when it is shallow. The other sizes have a flat-beveled nose entry to reduce drag and avoid the water sucking up the rail. The round boxy rail throughout the middle of the board gives the most volume close to the bottom and makes the shape stable to kneel on it.

SHAPE:

  • Cutouts: For easier and quick take-off the trick is to find the right reduction of tail volume to sink and position the front wing with a better angle of attack. The sharp edges around the tail are essential to have clean water flow release and reduce the drag when increasing/maintaining speed gliding on top of the water for take-off and touch down.
  • Bottom Shape: After testing, we choose less concave depth to avoid the board dragging through the water too much. We, therefore, compromised a bit softer touch-down against quicker take-off, more acceleration and speed, and less drag with more release after touch down.
  • EVA (Deck Pad): A full deck EVA with an indicated bump to quickly see and feel the center of the board.
  • Finbox: No matter if you choose to shred waves, pull freestyle moves, compete in races or simply cruise along we offer on all our sizes the Deep-Tuttle Foilbox and the 10” US-Tracks.
  • Inserts: With so many different foil setup options the feet position is crucial and with 68 possible holes at the front foot and 22 holes at the back foot we offer any strap position needed.
  • Leash Plug & Fin-Handle: Secure your board with a wrist- or leg-leash attached to the leash plug at the tail. For strength & performance reasons we offer a Grab-Handle-Fin to carry the board which is fixed with the “FCS-System” on the bottom of the board (size 5’2” and bigger).

A.I.O. DIMENSIONS

t-wave Dimensions
  LENGTH
[MM]		 WIDTH
[MM / IMPERIAL]		 VOLUME
[LITRE]		 WEIGHT
(+/-6%)
[KG]		 STRAP
OPTIONS &
INSERT HOLES		 STRAP
QUANTITY		 FIN BOX
A.I.O. 4’6” 137 51 / 20” 35 TBC 3 position in front and one in the back – 68 front strap / 22 tail strap holes 3 Foil-DTB & US Plate
A.I.O. 5’0” 152 55 / 21 1/2” 50 TBC 3 position in front and one in the back – 68 front strap / 22 tail strap holes 3 Foil-DTB & US Plate
A.I.O. 5’1” 155 61 / 24” 75 TBC 3 position in front and one in the back – 68 front strap / 22 tail strap holes 3 Foil-DTB & US Plate
A.I.O. 5’2” 157 67 / 26 1/2” 95 TBC 3 position in front and one in the back – 68 front strap / 22 tail strap holes 3 Foil-DTB & US Plate
A.I.O. 5’9” 175 72 / 28 1/2” 115 TBC 3 position in front and one in the back – 68 front strap / 22 tail strap holes 3 Foil-DTB & US Plate
A.I.O. 6’6” 198 77 / 30 1/2” 135 TBC 3 position in front and one in the back – 68 front strap / 22 tail strap holes 3 Foil-DTB & US Plate
A.I.O. WS 5’9” 175 72 / 28 1/2” 115 TBC 3 wing and 4 windsurf position – 108 pcs strap inserts holes 4 Foil-DTB & US Plate
A.I.O. WS 6’6” 198 77 / 30 1/2” 135 TBC 3 wing and 4 windsurf position – 108 pcs strap inserts holes 4 Foil-DTB & US Plate

Consider with the weight that PATRIK boards have way more inserts and also the deep tuttle box in every board!

ab 1.799,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Verlängerung X-Tension Alu SDM Extension
Patrik pd Verlängerung X-Tension Alu SDM Extension
Patrik SDM Aluminium Verlängerung Alloy Extenison

Durchmesser:
Standard SDM

Material:
Alu

Sizes:
2-32cm Verstellbereich
2-48cm Verstellbereich

Optional:
​Carbon Verlängerung auf Nachfrage
ab 129,00 EUR
inkl. 19% MwSt. zzgl. Versand
Carbon Set
Patrik AIO Windsurf Foil System HF Ride Set
Patrik AIO Windsurf Foil System 
HF Ride

OVERVIEW

As the name so the ride – enjoy your flight!
The Alu is the more entry level for low flight hight and the Carbon is for more dedicated Freeriders with higher flight hight.
 

Set includes a padded bag, EVA wing cover, screws and screwdriver.

 

MODEL FRONT WING TAIL WING FUSELAGE MAST ADAPTER / BOX
Ride ALU 1100 cm2 250 cm2 ALU 95 cm ALU 85 cm DTB
Ride Carbon 1100 cm2 250 cm2 ALU 95 cm Carbon 95 cm DTB

 

ab 1.149,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Sails 4-Wave
-8%
Patrik Sails 4-Wave

4-Wave  side/side-offshore Bitte VOR Bestellung kurz über das Kontaktformular anfragen, ob die relevante Größe aktuell verfügbar ist.
4-Latten
4-Batten

4 WAVE – SAIL SPECIFICATIONS

  Luff
(+- 2cm)		 Boom
(+- 3 cm)		 Ideal mast Compatible mast Vario top
3.2sqm   337cm 136cm RDM 340 – IMCS 15 RDM 370 – IMCS 17   YES
3.6sqm   358cm 144cm RDM 340 – IMCS 15 RDM 370 – IMCS 17   YES
4.0sqm   374cm 148cm RDM 370 – IMCS 17 RDM 340 – IMCS 15    NO
4.4sqm   388cm 157cm RDM 370 – IMCS 17 /   NO
4.8sqm   403cm 165cm RDM 400 – IMCS 19 RDM 370 – IMCS 17   NO
5.2sqm   419cm 170cm RDM 400 – IMCS 19 /   NO
5.6sqm   432cm 171cm RDM 430 – IMCS 21 RDM 400 – IMCS 19   NO
6.0sqm   444cm 176cm RDM 430 – IMCS 21 /   NO
 
 
Statt 699,00 EUR
Ab nur 639,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Mast C80% RDM
Patrik pd Mast C80% RDM
Patrik Mast C80% RDM (Bitte Verfügbarkeiten vor Bestellung anfragen. Es sind derzeit nicht immer alle Größen sofort lieferbar)
 

RDM MAST SIZES

MODEL Length Diameter Carbon Curve IMCS
RDM C 80% 340 RDM 80% Constant 15
  370 RDM 80% Constant 17
  400 RDM 80% Constant 19
  430 RDM 80% Constant 21
  460 RDM 80% Constant 26
  490 RDM 80% Constant 29
 
 
ab 449,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Trapeztampen Harnesslines Vario
Patrik pd Trapeztampen Harnesslines Vario
Patrik Trapeztampen Vario

Vario Trapeztampen

Sizes:
26"-32"
28"-34"
30"-36"

 

44,95 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik 2023/2024 SUP Inflatable S-Race 12'6 x 25 (aus Deko)
TOP
-41%
Patrik 2023/2024 SUP Inflatable S-Race 12'6 x 25 (aus Deko)
PATRIK BOARDS 2023/2024 SUP S-Race 12'6 (Das Board war zu Dekozwecke 1x aufgeblasen auf einer Messe)

For race guys or for training on lakes.
12'6 series

Inkl. Rucksack, Pumpe, Paddel, Finne.

Länge: 12'6’’ / xxx cm
Breite: 25,0" / xx cm
Dicke: 6.0'' / xx cm
Gewicht: tba
Volumen: tba
Finnen: tba
 

OVERVIEW

Our line of SUPs covers inflatable SUPs (iSUP) of superior quality and a advanced and computer-optimised high-accuracy construction that makes our boards stiffer and strongerthan other boards on the market. Our "control-flex" construction technology was developed over four years of intense testing and non-stop R&D in close cooperation with our production factory which is highly specialised in high-performance dinghys, rafts and ribs.

In this unique construction we are able to reproduce different bottom shapes on inflatable SUPs with umatched precision. This allows us to give a Vee bottom to some of our boards in the range and a single concave depending on the shape concept.

All inflatable boards come with a wheeled multi compartment bag and a 3-piece paddle that fits into this bag. Switchable 2-way Pump, Fin and Repairkit included.

 

Statt 1.199,00 EUR
Nur 699,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Trapeztampen Harnesslines Vario Pro Comp 28-42
Patrik pd Trapeztampen Harnesslines Vario Pro Comp 28-42
Patrik prof. Trapeztampen Pro Comp 28-42

Trapeztampen der Profis mit Belegklemme und Verstellbereich von 28"  - 42".

 

139,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Mast C80% SDM
Patrik pd Mast C80% SDM
Patrik Mast C80% SDM (Bitte Verfügbarkeiten vor Bestellung anfragen. Es sind derzeit nicht immer alle Größen sofort lieferbar)
 

SDM MAST SIZES

MODEL Length Diameter Carbon Curve IMCS
SDM C 80% 380 SDM 100% Constant 17
  400 SDM 100% Constant 19
  420 SDM 100% Constant 21
  440 SDM 100% Constant 23
  460 SDM 100% Constant 26
  480 SDM 100% Constant 29
ab 429,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik AEON Front Wing
Patrik AEON Front Wing
2024 Patrik Front Wing AEON
(Verfügbarkeit bitte vor Bestellung anfragen, es sind nicht immer alle Größen verfügbar)


WORLDCUP PERFORMANCE LOW-DRAG FOIL FRONT WINGS FOR YOUR AEON FOIL SYSTEM

OVERVIEW

Our front wings have the best thickness-to-strength ratio on the market resulting in ultra-stiff wings with controlled flex patterns. Our production process has been optimised to have the lowest tolerances in the windsurfing industry.

  • “DNA-M” for “Medium” stiffness. More power for heavy riders and lighter winds. Affordable pricing.

  • “DNA-H” for stiffness level “Hard”. Maximum control in high winds, high speed runs and jibes.

 

SPECS

 SIZE  SPAN  RATIO RANGE OF USE  CONSTRUCTION
 375  620 mm  10.25  speed, high-wind slalom  hard / medium
 450  680 mm  10.28  slalom, wing speed  hard / medium
 550  750 mm  10.23  slalom, wing racing  hard / medium
 650  810 mm  10.09  low-wind slalom, wing racing  hard / medium
 750  850 mm  09.63  course racing, winging, freerace  hard / medium
 900  900 mm  09.00  course racing, winging, freerace  hard / medium
 

CONSTRUCTION

To protect the advantage of having the stiffest parts we won’t name any construction secrets for the AEON frontwings. 

As the only brand in the history of windsurfing being able to successfully produce hollow boards in more than 20 sizes (AirInside) our know-how in composite construction technology is literally miles ahead of competitor brands. With our own production setup of “Fullcore” boards (EPS Core) we’ve set the industry’s bench mark for weight and tolerance quality of EPS production boards. With our AEON foil constructions we are leading the industry again by offering the thinnest and most high-aspect designs with the stiffest flex vs twist ratio.

All foil parts are fitted with TX30 torx screws.
All frontwings are using m8 TX30 screws to secure the frontwings to the fuselage as we've tested that m6 screws - as used by many brands - are not reliable enough. 

SANDING AND WARRANTY:
All AEON carbon parts have a "clear cote finish" to look optically appealing and perfect. This coating is sealing the carbon layers. Please note that sanding off this factory coating - partially or completely - will end the product warranty and any sanding will be fully at your own risk. Sanded AEON parts will change their look from glossy to matt finish. Always get some advise and guidance from experienced racers before sanding your foil parts. There is no general need to extensively sand the AEON carbon parts as we're using a very advanced production process. Only do so if you're 100% sure about what you're doing and why you're doing it.

 

CONCEPT

DESIGN GOALS
Our target was to create high-performance foils with full compatibility for all foiling sports and disciplines. 
We wanted this foil system to be commercially available at different price levels from the “whatever-it-takes world cup level” to the demanding needs of more price sensitive customers. The AEON has been designed for maximum control – easing the fight of mastering 3-dimensional flight for both the skilled world cup rider fighting in the pack and the indermediate rider. Having one connection system for wind-, wing-, prone- and kite-foiling is a massive economic advantage for multi sport users and allows every rider to find his perfect personal setup easily. At the same time the multi-sport option opens a much bigger market to resell AEON foil parts. The AEON will be vailable in our retail network as a complete high-performance foil system that can fulfil any waterman's wishes and needs. One system can do it all!

MAN VS. MACHINE
The massive success of the AEON-Foil in both Windsurfing AND Wing-Foiling is the result of our PATRIK R&D crew’s precise and hard work. Our products are being developed in a unique hybrid process where the human brain (knowledge) and hands (feeling) are clearly leading the computer aided design – not the other way around. Like this we’re able to design perfect products that no “A.I.” (artificial intelligence) could ever create. 
Fun-Fact: CFD (computational fluid dynamic) programs are created by humans, fed with data based on past practical tests, but will never be able to calculate completely new results outside their given data range. The PATRIK-Crew is practically developing and testing gear outside that software range and our results will be used later to feed and update currently available CFD programs.

SINGLE PARTS VS. SETS
After our R&D Team had found peak performance in individual outlines and shapes they had individual wishes for flex and twist resulting in different “magic” combinations of AEON parts. Offering all parts separately gives the top riders the freedom to find their magic setup while the indermediate riders can choose the best combo for their budget.

 

SETUPS

"Michele Becker" PWA Slalom Setups
95 Dim-S Mast, 450 DNA-H Frontwings, 100 V2 Titaninum Fuselage, 160 Backwing in rear position +1° shim
95 Dim-S Mast, 550 DNA-H Frontwings, 100 V1 Titaninum Fuselage, 160 Backwing in rear position +1° shim

"Alex Cousin" 6.0 PWA Slalom Setup
95 Dim-S Mast, 375 DNA-H Frontwings, 100 V3 Titaninum Fuselage, 160 Backwing in rear position +1.5° shim

"Elia Colombo" 9.0 Course Racing Setup
100 Dim-L Mast, 900 DNA-H Frontwing, 110 V1 Aluminum Fuselage, 195 Backwing in rear position +1° shim

"Nico Warembourg" 4.2 DEFI Setup
95 Dim-S Mast, 375 DNA-H Frontwings, 100 V1 Titanium Fuselage, 160 Backwing in rear position +1,75° shim

"Patrik Diethelm" Freerace Setup
95 Dim-M Mast, 750 DNA-M Frontwing, 100 V1 Aluminum Fuselage, 195 Backwing in rear position +0,5° shim

Speed Foiling Setup
95 Dim-S Mast, 375 DNA-H Frontwing, 100 V3 Titaninum Fuselage, 160 Backwing in rear position +1,5° shim




 
ab 439,00 EUR
inkl. 19% MwSt. zzgl. Versand
pd Patrik Boards f-wave (Free Wave)
TOP
pd Patrik Boards f-wave (Free Wave)
2024 f-wave 

OVERVIEW

This new concept in our range is made for the airtime lovers who don’t want to sacrifice the wave riding. The PATRIK F-Wave is most probably the fastest waveboard ever that still performs well in small to medium waves. With a Powerbox for the center fin of the thruster setup we leave it entirely up to you which fin to choose to go fast and jump high or ride waves and slice turns.
Following the success of the 75, 85 and 95, Patrik Diethelm shaped the 105 and 115 which are new for 2023. These bigger sizes have a new rockerline with increased Vee. They feel small on the wave, but carry all the volume you need to be the first one planing. If you love  to play in different conditions, the new F-Wave is here for you!

 

SHAPE & CONSTRUCTION

OPTICAL ASPECT & FOOTPADS
With the new graphics influenced by Italian designer Fabio Canella we have created a colourful but still clean and classic board design. The 6mm thick diamond groove grip pad has an extra 6mm soft sponge under-layer which makes it 12mm in total. The special layup uses the hard layer to spread the load onto a wider board surface via the soft bottom layer of the pad. This gives us more impact resistance while keeping a direct feeling under your feet.

SHAPE
The very fast rocker line with rather little rocker is planning very quick. The “bat-tail” and side cut-outs have a similar effect like on a slalom board and release the water earlier and drive the board up to top speed in no time and make the board feel loose on the straight line and agile in the turns.

SCOOP-ROCKER
Very fast rocker line with little rocker for top planning, acceleration and top speed.

VOLUME DISTRIBUTION
Same as the QT-wave it has a balanced thickness under the feet and mast track to be close in contact with the fins for good control, grip and manoeuvrability but it is still thick enough to be able and push for top speed and high jumps.

OUTLINE
In comparison to the QT-wave it is wider at “1-foot” to be able and push even more for planning, acceleration and top speed. The cut-out on the tail bottom is a kind of hidden winger which reduces the tail width in the back-strap area and brings similar advantages. The reduced surface let the water release earlier and increases especially acceleration and top speed but it also helps to tilt the board over into the bottom turn and roll back easier into the cutback.

BOTTOM SHAPE
The goal was a fast controlled smooth ride and this we achieved with a single concave under the mast track running into a “double concaved V” under the straps on the two smaller boards while the bigger board performed best with the “double concaved V” running all the way through the bottom.

RAILS/TUCK
To improve the turning ability on the wider shape we reduced the rail thickness in comparison to the QT-wave. For better and faster release, the tuck is a bit sharper as well and improve the early planning acceleration and top speed.

DECK SHAPE
Flat decks are ankle breakers when it comes to push for top speed and the reduced rail thickness in combination with the slighty thicker center of the board makes the deck more domy and much more comfortable when fully planning in the straps. The extra dome under the back foot helps to get more grip during rotations.

FINS
The F-wave comes equiped with 3x PATRIK fins as a classic Thruster Setup with a bigger center fin and smaller side fins. This has proven to be the fastest setup for waves and jumping. The Center Powerbox allows the use of bigger Centerfins without the risk of breaking the board. The slot box sides save weight and leave you with enough trim options.

INSERTS
Each insert has 4-positions. The front strap has got a double plug to be able and change width and strap angle for different foot sizes and riding styles.

CONSTRUCTION
The topic where opinions split radically. But at the end of day let the advanced riders prove that our construction is built to last. The full carbon/kevlar deck is light and stiff with a good impact resistance. The Biax glass fibres on the bottom give you that controlled extra flex our riders love for the big turns and landings. Important fact: The softer biax glass spreads the load much better into the 3d construction than a full carbon bottom would. This results in better flex, better strength and better overall performance, while saving some money on production costs where it's not needed. Patrik Diethelms knowlede in composite construction is unmatched in the windsurf industry. This is our way of creating sustainable products that will last you many years when used correctly.
 

SPECS

 
  Length Width Volume Tail Width
at 300		 Nose Width
at 2000 		 Weight
(+/-6%)		 Strap
Options 		 Straps Fin Box
 F-wave 75 2290 555 75  363 388 TBC 5×4 3 1x central Powerbox + 2x slot box
 F-wave 85 2300 585 85  386 428 TBC 5×4 3 1x central Powerbox + 2x slot box
 F-wave 95 2330 605 95  400 462 TBC 5×4 3 1x central Powerbox + 2x slot box
‌ F-wave 105 ‌2340 ‌630 1‌05  418 489 T‌BC ‌5×4 ‌3 1x central Powerbox + 2x slot box‌
 F-wave 115 2‌340 6‌55 ‌115  437 518 ‌TBC ‌5×4 ‌3 1x central Powerbox + 2x slot box‌

 

 

 

2.799,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Sails 5-Wave
-18%
Patrik Sails 5-Wave

5-Wave  allround wave sail Bitte VOR Bestellung kurz über das Kontaktformular anfragen, ob die relevante Größe aktuell verfügbar ist.
5-Latten
5-Batten

5 WAVE – SAIL SPECIFICATIONS

  Luff
(+- 2 cm)		 Boom
(+- 3 cm)		 Ideal mast Compatible mast Vario top
3.4sqm   349cm 139cm RDM 340 – IMCS 15   RDM 370 – IMCS 17   YES
3.8sqm   366cm 145cm RDM 340 – IMCS 15 RDM 370 – IMCS 17   YES
4.2sqm   383cm 151cm RDM 370 – IMCS 17 /  NO
4.6sqm   403cm 157cm RDM 370 – IMCS 17 RDM 400 – IMCS 19   NO
5.0sqm   419cm 161cm RDM 400 – IMCS 19 /  NO
5.4sqm   433cm 167cm RDM 400 – IMCS 19 RDM 430 – IMCS 21   NO
5.8sqm   447cm 175cm RDM 430 – IMCS 21 /  NO
6.2sqm   457cm 181cm RDM 430 – IMCS 21 /  NO
 
 
Statt 799,00 EUR
Ab nur 649,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Fins SWEEP WAVE (SW) - WAVE
Patrik Fins SWEEP WAVE (SW) - WAVE

SWEEP Wave (SW)
> BOARD type : Sideshore WAVE

S-wave: wave fin aimed for side shore situations. Its emphasised back-curved outline gives a great precision in defining your trajectory even through the biggest wave. Every size has its own specific tip thickness in order to create the exact flex desired by the top riders for their extreme performances.

Besides, the exclusive designing process is aimed to let the real profile be always parallel to water flow even at tip spot, so that the fin is faster and more efficient at the same time.

The tiniest sizes can be also matched with P-wave central fin/s, for thruster/quad set ups, so that you will gain pure speed but still have a lot of drive on waves.

The biggest sizes will largely satisfy those who still appreciate the “single fin” wave boards speed and surfing style.

SIZES

SLOT

80, 90, 100, 110, 120, 130, 140, 150, 155, 160, 165, 170, 180

NUSS = new US / Slot

80, 90, 100, 110, 120, 130, 140, 150, 155, 160, 165, 170, 180, 190, 200, 210, 220, 230, 240, 250

Bitte vor Bestellung kurz über das Kontaktformular die verfügbaren Größen/Boxen anfragen.

ab 59,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Mast C100% RDM
Patrik pd Mast C100% RDM
Patrik Mast C100% RDM (Bitte Verfügbarkeiten vor Bestellung anfragen. Es sind derzeit nicht immer alle Größen sofort lieferbar)
 

RDM MAST SIZES

MODEL Length Diameter Carbon Curve IMCS
RDM C 100% 370 RDM 80% Constant 17
  400 RDM 80% Constant 19
  430 RDM 80% Constant 21
  460 RDM 80% Constant 26
  490 RDM 80% Constant 29
ab 609,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Fins POWER WAVE (PW) - WAVE
Patrik Fins POWER WAVE (PW) - WAVE

POWER Wave (PW)
> BOARD type : Allround WAVE

P-wave: multi pourpose wave fin, which comes as standard for our very adaptable all-around Qt-wave boards. This fin has a trailing edge quite straight and planes and turns creating very narrow turning radius. For this reason, this fin is also perfect for on-shore or gusted wind conditions, to run away quickly from the shore break.

Furthermore, if you like the “slashed” style to create very high sprays, we assure you will really enjoy our P-waves!

The small sizes can be also matched with the P-style fins for thruster configuration on on-shore wave or freestyle-wave boards, in order to have more traction to caress waves surface keeping your board fast. This is, actually, the exact standard configuration you will find on our fast F-wave boards.

SIZES

SLOT

80, 90, 100, 110, 120, 130, 140, 150, 155, 160, 165, 170

NUSS = new US / Slot

80, 90, 100, 110, 120, 130, 140, 150, 155, 160, 165, 170, 180, 190, 200, 210, 220, 230, 240, 250

POWER BOX

180, 190, 200, 210, 220, 230, 240, 250


Bitte vor Bestellung kurz über das Kontaktformular die verfügbaren Größen/Boxen anfragen.

ab 59,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Mast C100% SDM
Patrik pd Mast C100% SDM
Patrik Mast C100% SDM (Bitte Verfügbarkeiten vor Bestellung anfragen. Es sind derzeit nicht immer alle Größen sofort lieferbar)
 

SDM MAST SIZES

MODEL Length Diameter Carbon Curve IMCS
SDM C 100% 380 SDM 100% Constant 17
  400 SDM 100% Constant 19
  420 SDM 100% Constant 21
  440 SDM 100% Constant 23
  460 SDM 100% Constant 26
  480 SDM 100% Constant 29
  500 SDM 100% Constant 32
  520 SDM 100% Constant 33
  550 SDM 100% Constant 37
ab 679,00 EUR
inkl. 19% MwSt. zzgl. Versand
pd Patrik Boards air-style (Freestyle)
pd Patrik Boards air-style (Freestyle)
2024 air-style Freestyle  

OVERVIEW

It's simply amazing to witness what is possible on a windsurfer. The young generation has pushed freestyle to another level. This shape is not just a board with a cut nose but it is a real developed short board and the differences are significant. No matter if in the air or on the water the rotation speed is simply faster and it is the key point to pull multiple moves.

 

SHAPE

FOOTPADS
The 6mm thick diamond groove grip pad has an extra 6mm soft sponge under-layer which makes it 12mm in total. The special layup uses the hard layer to spread the load onto a wider board surface via the soft bottom layer of the pad. This gives us more impact resistance while keeping a direct feeling under your feet.

SCOOP-ROCKER
Fast rocker line with top planning and acceleration ability and a touch of tail rocker for extra pop.

VOLUME DISTRIBUTION
Very thick under the back strap for maximum push to plane early, accelerate, go upwind and pop.

OUTLINE
The short length with the normal nose width makes the board feel light and compact and makes it spin faster. The wide middle for early planning and stable platform when sliding, rotate and spin on the water. Reduced tail width behind the strap for less wetted surface and better tail sinking when pushing for the pop.

BOTTOM SHAPE
A flat panel V under the mast track for maximum water slide ability and a slight double concave under the straps to absorb the chop and slight better tracking with the short fin used.

RAILS/TUCK
Super soft in the nose area for maximum slide but a bit edgier trough the center to keep the planning and acceleration and sharp in the tail for clean water release and top speed.


DECK SHAPE
Dome deck in the tail area for more grip under the back foot and quite flat under the front foot makes it more comfortable to ride in switch stands position.

FIN BOXES & INSERTS
Power Box. All double inserts with 4-positions for anti-Twist and extra possibilities to change angle and width for different foot size and riding style.
 

SPECS

  Length Width Volume Tail Width
at 300		 Nose Width
at 2000		 Weight
(+/-6%)		 Strap
Options &
Insert Holes		 Strap
Quantity		 Fin Box Approved
Series
Air-style 93 2115 615 93 422 307 TBC 5×4 3 Power Box PWA
Air-style 99 2120 645 99 445 335 TBC 5×4 3 Power Box PWA

 

 

 

2.699,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Sails X-Cross
-20%
Patrik Sails X-Cross
Patrik Sails X-Cross (Crossover)
Bitte VOR Bestellung kurz über das Kontaktformular anfragen, ob die relevante Größe aktuell verfügbar ist.

 

  Luff
(+- 2 cm)		 Boom
(+- 3 cm)		 Ideal mast
4.2sqm   381cm 151cm RDM 370
4.7sqm   403cm 161cm RDM 370
5.3sqm   421cm 173cm RDM 400
5.9sqm   439cm 183cm RDM 430
6.6sqm   457cm 193cm RDM 430
7.3sqm   475cm 203cm RDM 460
Statt 749,00 EUR
Ab nur 599,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik AEON Backwing Tail Wing
Patrik AEON Backwing Tail Wing
2024 Patrik AEON Tail Back Wing
(Verfügbarkeit bitte vor Bestellung anfragen, es sind nicht immer alle Größen verfügbar)

 

OVERVIEW

“DNA-H” (hard) only for the most stability and control in all conditions. The special profile and shape of the backwings allow us to use low angles of attack on the stabilizers without losing control and flight stability. The whole foil system is working as one. Our backwings are carefully finetuned to work best with our fuselage shapes and frontwings.

  • 160: Surface 160cm2, Span 380mm, Aspect Ratio 9.03

  • 195: Surface 195cm2, Span 420mm, Aspect Ratio 9.05

    (Bigger sizes for Windsurf and Wingfoil Wave / Freestyle and Freeride to come 2024.)

 

CONCEPT

DESIGN GOALS
Our target was to create high-performance foils with full compatibility for all foiling sports and disciplines. 
We wanted this foil system to be commercially available at different price levels from the “whatever-it-takes world cup level” to the demanding needs of more price sensitive customers. The AEON has been designed for maximum control – easing the fight of mastering 3-dimensional flight for both the skilled world cup rider fighting in the pack and the indermediate rider. Having one connection system for wind-, wing-, prone- and kite-foiling is a massive economic advantage for multi sport users and allows every rider to find his perfect personal setup easily. At the same time the multi-sport option opens a much bigger market to resell AEON foil parts. The AEON will be vailable in our retail network as a complete high-performance foil system that can fulfil any waterman's wishes and needs. One system can do it all!

MAN VS. MACHINE
The massive success of the AEON-Foil in both Windsurfing AND Wing-Foiling is the result of our PATRIK R&D crew’s precise and hard work. Our products are being developed in a unique hybrid process where the human brain (knowledge) and hands (feeling) are clearly leading the computer aided design – not the other way around. Like this we’re able to design perfect products that no “A.I.” (artificial intelligence) could ever create. 
Fun-Fact: CFD (computational fluid dynamic) programs are created by humans, fed with data based on past practical tests, but will never be able to calculate completely new results outside their given data range. The PATRIK-Crew is practically developing and testing gear outside that software range and our results will be used later to feed and update currently available CFD programs.

SINGLE PARTS VS. SETS
After our R&D Team had found peak performance in individual outlines and shapes they had individual wishes for flex and twist resulting in different “magic” combinations of AEON parts. Offering all parts separately gives the top riders the freedom to find their magic setup while the indermediate riders can choose the best combo for their budget.

 

CONSTRUCTION

To protect the advantage of having the stiffest and thinnest parts we won’t name any construction secrets used for our backwings. All foil parts are using TX40 screwheads. The backwing is being mounted with two M6 bolts.

SANDING AND WARRANTY:
All AEON carbon parts have a "clear cote finish" to look optically appealing and perfect. This coating is sealing the carbon layers. Please note that sanding off this factory coating - partially or completely - will end the product warranty and any sanding will be fully at your own risk. Always get some advise and guidance from experienced racers before sanding your foil parts. There is no general need to extensively sand the AEON carbon parts as we're using a very advanced production process. Only do so if you're 100% sure about what you're doing and why you're doing it.

 

SETUPS

"Michele Becker" PWA Slalom Setups
95 Dim-S Mast, 450 DNA-H Frontwings, 100 V2 Titaninum Fuselage, 160 Backwing in rear position +1° shim
95 Dim-S Mast, 550 DNA-H Frontwings, 100 V1 Titaninum Fuselage, 160 Backwing in rear position +1° shim

"Alex Cousin" 6.0 PWA Slalom Setup
95 Dim-S Mast, 375 DNA-H Frontwings, 100 V3 Titaninum Fuselage, 160 Backwing in rear position +1.5° shim

"Elia Colombo" 9.0 Course Racing Setup
100 Dim-L Mast, 900 DNA-H Frontwing, 110 V1 Aluminum Fuselage, 195 Backwing in rear position +1° shim

"Nico Warembourg" 4.2 DEFI Setup
95 Dim-S Mast, 375 DNA-H Frontwings, 100 V1 Titanium Fuselage, 160 Backwing in rear position +1,75° shim

"Patrik Diethelm" Freerace Setup
95 Dim-M Mast, 750 DNA-M Frontwing, 100 V1 Aluminum Fuselage, 195 Backwing in rear position +0,5° shim

Speed Foiling Setup
95 Dim-S Mast, 375 DNA-H Frontwing, 100 V3 Titaninum Fuselage, 160 Backwing in rear position +1,5° shim

ab 299,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Fins SLIDE STYLE (SS) - Adv. FREESTYLE
Patrik Fins SLIDE STYLE (SS) - Adv. FREESTYLE

SLIDE Style (SS)
> BOARD type : Advanced FREESTYLE

S-style: hardened freestyler, this fin is looking for you! S-style stands for “slide-style”, and this gives you the clue what it has been designed for. It has a quite elliptical outline, calibrated measures that fit exactly what PWA freestyler top riders ask for.

When we designed it, we focused on several elements such as: the lift needed to plane soon even using a so small fin, a calibrated shape to give you the best mix of the slightest resistance during multiple rotations and control, since nobody likes fins reacting sharply when you change foot pressure to prepare your next switch trick.
Last but not least, we kept in mind the updwind performance, really important when you need to stay in a well defined “water space” and be able to show all your moves in a heat of very few minutes.

SIZES

NUSS = new US / Slot

160, 180, 200, 220

POWER BOX

160, 170, 180, 190, 200, 210, 220


Bitte vor Bestellung kurz über das Kontaktformular die verfügbaren Größen/Boxen anfragen.

ab 109,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Verlängerung X-Tension Carbon RDM Extension
Patrik pd Verlängerung X-Tension Carbon RDM Extension
Patrik RDM Carbon Verlängerung Alloy Extenison

Durchmesser:
Standard RDM

Material:
Carbon

Sizes:
2-32cm Verstellbereich
2-48cm Verstellbereich

Optional:
Alu Verlängerung auf Nachfrage
ab 209,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Fins POWER STYLE (PS) - FREESTYLE (-Wave)
Patrik Fins POWER STYLE (PS) - FREESTYLE (-Wave)

Power Style (PS)
> BOARD type : FREESTYLE, Freestyle Wave, Freemove

P-style: windsurfing essence. This fin is perfect for those who want to achieve every windsurfing goal, and consequently keeping a big smile on their faces once out of water. This fin helps you with your first experiences on waves, such as with common freestyle moves, bump&jump and hi-wind freeride use. This fin will definitely not let you down!

For all the above-mentioned reasons, you will see it matched to our F-cross (single fin) boards and chosen as central fin for F-wave (thruster) boards.

SIZES

NUSS = new US / Slot

160, 180, 200, 220, 240, 260

POWER BOX

160, 180, 200, 220, 240, 260, 280, 300, 320, 340, 360


Bitte vor Bestellung kurz über das Kontaktformular die verfügbaren Größen/Boxen anfragen.

ab 109,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik pd Verlängerung X-Tension Carbon SDM Extension
Patrik pd Verlängerung X-Tension Carbon SDM Extension
Patrik SDM Carbon Verlängerung Alloy Extenison

Durchmesser:
Standard SDM

Material:
Carbon

Sizes:
2-32cm Verstellbereich
2-48cm Verstellbereich

Optional:
Alu Verlängerung auf Nachfrage
ab 209,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Sails Ride FR
-20%
Patrik Sails Ride FR
Patrik Sails Ride FR (Freeride)
Bitte VOR Bestellung kurz über das Kontaktformular anfragen, ob die relevante Größe aktuell verfügbar ist.

 

  Luff
(+- 2 cm)		 Boom
(+- 3 cm)		 Ideal mast
4.4sqm   403cm 151cm RDM 370
5.0sqm   421cm 159cm RDM 400
5.6sqm   439cm 169cm RDM 400
6.2sqm   455cm 181cm RDM 430
6.8sqm   471cm 189cm RDM 460
7.5sqm   493cm 201cm RDM 460
8.2sqm   511cm 209cm RDM 490
Statt 799,00 EUR
Ab nur 639,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Fins POWER RIDE (PR) - FREERIDE
Patrik Fins POWER RIDE (PR) - FREERIDE

Power Ride (PR)
> BOARD type : FREERIDE

P-ride: if you see windsurfing as a way of being relaxed and you wish you could forget about equipment (and you don’t want to spend time to trim everything…every time!), this fin won’t let you down, since it will give you the best control both on straight and when dealing with your power jibes. However, you won’t have a “lazy” board, because P-ride fins are fast and have been developed and tested together with P-race ones. Besides, every size has its own calibrated thickness so that you can forget about “spin-out” or unstable fins.

SIZES

POWER BOX

380, 400, 420, 440, 460, 480, 500

TUTTLE BOX

380, 400, 420, 440, 460, 480, 500

​Bitte vor Bestellung kurz über das Kontaktformular die verfügbaren Größen/Boxen anfragen.

189,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik AEON Fuselage
Patrik AEON Fuselage
Patrik Fuselage
(Verfügbarkeit bitte vor Bestellung anfragen, es sind nicht immer alle Größen verfügbar)

OVERVIEW

“Aluminium” beats carbon in terms of compatibility, stiffness and lightweight 3-Dimensional strength.

“Titanium” beats aluminium and carbon offering even more stiffness and allowing reduced diameter outlines with less drag and improved 3-dimensional strength.

Mast-Fuselage connection: The patent pending “Self-Lock Dual-Box” guarantees the safest and stiffest connection backed up with 2x M6 extra safety bolts.

Frontwing connection: The flat surface with a recess in the centre and 3x M8-Bolts is offering the stiffest and most reliable front wing connection available.

Backwing connection: The flat surface with a centre recess and multiple m6 inserts guarantees precise backwing trim options with a stiff and reliable connection.

 

SPECS

  • 100cm-V1: Highest power ratio for cross-/upwind slalom in any conditions. Most lift in light winds.

  • 100cm-V2: Medium power ratio for crosswind to downwind slalom in any conditions.

  • 100cm-V3: Lower power ratio for downwind slalom and speed with max. control in strong winds.

  • 110cm-V1: Highest power ratio for upwind/downwind course racing in any conditions.

  • 110cm-V2: Medium power ratio for upwind/downwind course racing in any conditions.

    (More sizes for Windsurf Freeride and Winging Race, Wave, Freestyle to come.)
     

  • Tail wing positions and optional angle shims:

    • 0mm -> Tail wing all the way back for most stability and control.

    • -12.5mm -> Centered tail wing for more pitch/power reactivity without changing the angle of attack.

    • -25mm -> Tail wing forward for most pitch/power reactivity without changing the angle of attack.

    • 0°, 0.5°, 1°, 1.5°, 2° (Files for shims with 0.25 steps can be downloaded)

     

 

CONCEPT

DESIGN GOALS
Our target was to create high-performance foils with full compatibility for all foiling sports and disciplines. 
We wanted this foil system to be commercially available at different price levels from the “whatever-it-takes world cup level” to the demanding needs of more price sensitive customers. The AEON has been designed for maximum control – easing the fight of mastering 3-dimensional flight for both the skilled world cup rider fighting in the pack and the indermediate rider. Having one connection system for wind-, wing-, prone- and kite-foiling is a massive economic advantage for multi sport users and allows every rider to find his perfect personal setup easily. At the same time the multi-sport option opens a much bigger market to resell AEON foil parts. The AEON will be vailable in our retail network as a complete high-performance foil system that can fulfil any waterman's wishes and needs. One system can do it all!

MAN VS. MACHINE
The massive success of the AEON-Foil in both Windsurfing AND Wing-Foiling is the result of our PATRIK R&D crew’s precise and hard work. Our products are being developed in a unique hybrid process where the human brain (knowledge) and hands (feeling) are clearly leading the computer aided design – not the other way around. Like this we’re able to design perfect products that no “A.I.” (artificial intelligence) could ever create. 
Fun-Fact: CFD (computational fluid dynamic) programs are created by humans, fed with data based on past practical tests, but will never be able to calculate completely new results outside their given data range. The PATRIK-Crew is practically developing and testing gear outside that software range and our results will be used later to feed and update currently available CFD programs.

SINGLE PARTS VS. SETS
After our R&D Team had found peak performance in individual outlines and shapes they had individual wishes for flex and twist resulting in different “magic” combinations of AEON parts. Offering all parts separately gives the top riders the freedom to find their magic setup while the indermediate riders can choose the best combo for their budget.
 

SETS

"Michele Becker" PWA Slalom Setups
95 Dim-S Mast, 450 DNA-H Frontwings, 100 V2 Titaninum Fuselage, 160 Backwing in rear position +1° shim
95 Dim-S Mast, 550 DNA-H Frontwings, 100 V1 Titaninum Fuselage, 160 Backwing in rear position +1° shim

"Alex Cousin" 6.0 PWA Slalom Setup
95 Dim-S Mast, 375 DNA-H Frontwings, 100 V3 Titaninum Fuselage, 160 Backwing in rear position +1.5° shim

"Elia Colombo" 9.0 Course Racing Setup
100 Dim-L Mast, 900 DNA-H Frontwing, 110 V1 Aluminum Fuselage, 195 Backwing in rear position +1° shim

"Nico Warembourg" 4.2 DEFI Setup
95 Dim-S Mast, 375 DNA-H Frontwings, 100 V1 Titanium Fuselage, 160 Backwing in rear position +1,75° shim

"Patrik Diethelm" Freerace Setup
95 Dim-M Mast, 750 DNA-M Frontwing, 100 V1 Aluminum Fuselage, 195 Backwing in rear position +0,5° shim

Speed Foiling Setup
95 Dim-S Mast, 375 DNA-H Frontwing, 100 V3 Titaninum Fuselage, 160 Backwing in rear position +1,5° shim

 
 

 

ab 319,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik Fins POWER RACE (PRC) - SLALOM
Patrik Fins POWER RACE (PRC) - SLALOM

Power Race (PRC)
> BOARD type : SLALOM (PWA) & HI.PERFORMANCE FREERIDE

P-race: it is a slalom fin “dressed” with G10 material. We have been very ambitious when designing it, since we wanted to realize a product able to fully compete with blazoned and branded full carbon fins that you can find under PWA slalom athletes’ boards.

After producing several prototypes with different profiles (8), outlines (3), thickness (3) and many tested measures, we achieved to realize a fin that leave us astonished.

If you don’t believe us, you can ask those who have been engaged “head to head” against P-race fins riders and who, only once on the beach, have realized they had raced against a G10 fin.

Therefore, we are sure we can offer an excellent product for those who do not have time to develop any PWA rider technique and trim, but who, at the same time, wish to achieve maximum performances by using a full slalom and freerace equipment.

 

SIZES

TUTTLE BOX

280, 300, 320, 340, 360, 380, 400, 420

DEEP TUTTLE BOX

440, 460, 480, 500, 520

​Bitte vor Bestellung kurz über das Kontaktformular die verfügbaren Größen/Boxen anfragen.

ab 189,00 EUR
inkl. 19% MwSt. zzgl. Versand
Patrik AEON Torx T30 Screwdriver
Patrik AEON Torx T30 Screwdriver

Patrik AEON Torx T30 Screwdriver


 

OVERVIEW

Make sure to order your accessories when you are composing your individual AEON set from single parts. Shimset, bag and screwdriver need to be ordered seperately but will be included in the complete foil sets. Protection covers are included with the masts, frontwings and backwings. All AEON screws (m6 and m8) use the TX40 head. Tuttle box screw length will vary according to the board you are using and for that reason are not included with AEON the foil. Always make sure your tuttle box screws are long enough and fully use the thread lengths of the inserts.

CONCEPT

DESIGN GOALS
Our target was to create high-performance foils with full compatibility for all foiling sports and disciplines. 
We wanted this foil system to be commercially available at different price levels from the “whatever-it-takes world cup level” to the demanding needs of more price sensitive customers. The AEON has been designed for maximum control – easing the fight of mastering 3-dimensional flight for both the skilled world cup rider fighting in the pack and the indermediate rider. Having one connection system for wind-, wing-, prone- and kite-foiling is a massive economic advantage for multi sport users and allows every rider to find his perfect personal setup easily. At the same time the multi-sport option opens a much bigger market to resell AEON foil parts. The AEON will be vailable in our retail network as a complete high-performance foil system that can fulfil any waterman's wishes and needs. One system can do it all!

MAN VS. MACHINE
The massive success of the AEON-Foil in both Windsurfing AND Wing-Foiling is the result of our PATRIK R&D crew’s precise and hard work. Our products are being developed in a unique hybrid process where the human brain (knowledge) and hands (feeling) are clearly leading the computer aided design – not the other way around. Like this we’re able to design perfect products that no “A.I.” (artificial intelligence) could ever create. 
Fun-Fact: CFD (computational fluid dynamic) programs are created by humans, fed with data based on past practical tests, but will never be able to calculate completely new results outside their given data range. The PATRIK-Crew is practically developing and testing gear outside that software range and our results will be used later to feed and update currently available CFD programs.

SINGLE PARTS VS. SETS
After our R&D Team had found peak performance in individual outlines and shapes they had individual wishes for flex and twist resulting in different “magic” combinations of AEON parts. Offering all parts separately gives the top riders the freedom to find their magic setup while the indermediate riders can choose the best combo for their budget.

9,00 EUR
inkl. 19% MwSt. zzgl. Versand
1 bis 32 (von insgesamt 86)