OVERDRIVE Mach 3 2020 (coming soon)
SLALOM
Vorbestellung ab sofort möglich, Auslieferung chronologisch nach Bestelleingang ab Ende Februar 2020!
BITTE verfügbare Größen VOR Bestellung anfragen.
Race/Slalom-Segel werden in der Regel nur nach Vorbestellung ausgeliefert und sind nicht immer verfügbar, auch wenn wir einen Bestand haben.
The OverDrive focuses on maximum reaching speed with an increased twist and less back-hand pressure. A lighter weight means improved handling characteristics.
A moderate width sleeve, 7 battens, and 3 cams provide draft stability through a huge wind range. Combined with a higher aspect ratio, the OverDrive M3 has impeccable handling characteristics; a lightweight feel, with a softer flex.
Smaller sizes (5.5 and down) have 6 battens to increase flex and control for when conditions get extreme.
The OverDrive M3 benefits directly from advances made on the Mach3 development. Increased depth below the boom adds drive and stability whilst the mid and upper leech have been opened more to decrease drag. Flow aligned battens further improve aerodynamics. The resulting performance is explosive acceleration and big numbers on the GPS.
Key differences between the Mach3 and OverDrive are:
/ Sleeve width: 33% narrower than Mach3 for lower weight and less water retention.
/ Boom length: approx. 10cm shorter on most sizes for less back-hand pressure.
/ Lighter, softer feel.
OVERDRIVE M2 |
LUFF |
BOOM |
BATTENS |
WEIGHT |
CAMS |
HEAD |
RECOMMENDED MAST |
RDM/SDM CAM SETUP |
4.6 |
382 |
164 |
6 |
3.8 |
3 |
FIXED |
SEVERNE 370 |
3x RDM cams |
5.0 |
402 |
167 |
6 |
3.9 |
3 |
FIXED |
SEVERNE 400 |
1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM. |
5.5 |
416 |
178 |
6 |
4.1 |
3 |
FIXED |
SEVERNE 400 |
1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM. |
6.2 |
432 |
186 |
7 |
4.5 |
3 |
FIXED |
SEVERNE 430 |
1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM. |
7.0 |
462 |
191 |
7 |
4.8 |
3 |
FIXED |
SEVERNE 430 |
1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM. |
7.8 |
490 |
202 |
7 |
5.1 |
3 |
FIXED |
SEVERNE 460 |
1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM. |
8.6 |
512 |
210 |
7 |
5.3 |
3 |
FIXED |
SEVERNE 490 |
3x SDM |
9.4 |
520 |
220 |
7 |
5.6 |
3 |
FIXED |
SEVERNE 490 |
3x SDM |
|
|
|
|
|
|
|
|
* RDM top cam also works for SDM masts |